Alcatel 4200 E
Cost effective PBX/PABX call accounting solution
(Redirected from Alcatel 4200 D)
Alcatel 4200 E
You have to do the following settings using your Alcatel programming software (MMC).
If you don't have a cable you'll need to make the wiring directly on the CM board.
Connect X7, X8 : 10 pin BURNDY connector for connecting a pulse metering device (X7) and the MMC PC (X8). The terminals connected to these interfaces must be classified S.E.L.V.
Pin no. Signal Function 1 REMOTE Signal used for remote access 2 RXD 104 - Reception 3 TXD 103 - Transmission 4 DTR 108 - Data Terminal Ready 5 0V Ground 6 DCD 109 - Carrier Detection 7 RTS 105 - Request To Send 8 CTS 106 - Clear To Send 9 0V Ground 10 GND 102 - Signalling Ground
File:alcatel pbx alcatel 4200 e 1.png File:alcatel pbx alcatel 4200 e 2.png File:alcatel pbx alcatel 4200 e 3.png
